Melvelle Equipment Corp Pty Limited -
Our Superior Rail Drill is built to last. Produced and field proven in Australia to be the best. Simplicity and good design are the keys to this reliable rail drill.
Power Steel Rail Drill - Model SRD119
Our Superior Rail Drill is built to last. Produced and field proven in Australia to be the best. Simplicity and good design are the keys to this reliable rail drill. One of our clients has made the statement that these drills are 'the best machines' he has used".
The drill shown has our new quick acting clamp, push down lock, pull up release. It is wide opening, quicker to clamp and release, and more robust than earlier drills.
Our 5.5hp 400rpm drill uses a tungsten carbide or coblat HSS spade cutter. Tungsten carbide cutters are more fragile but will drill a hole through rail in about 20 seconds.
The 5.5hp drill is also available as a 140rpm drill to give extra power for drilling. Other speeds available on request. Operator choice of manual or automatic power feed.
Standard Flat drill adapter and either 5/16“ thick collets, or 3/8” thick collets. Optional No 3 morse taper. Optional of customer specified drive adaptors - price on request.
- Dimensions: 1270 L x 575 w x 530mm high
- Approx Weight: 64 kg ( and fitted with two carry handles).
Optional:
Power feed or hand feed. Longer feed length of 350 mm, or standard length of 200mm, continuous power (or manual feed if desired), drill centre line feed loads for greater drill stability and now the added benefit of using our brush on (once per hole) special grease type lubrication, of the drill bit.
Standard accessories are a height gauge block set with the spare blocks fastened to the drill as well as a position length stops also attached to the drill.
A further advantage is that our drill spindle is screwed and is able to accept almost any combination of drilling tool systems from No 3 Morse taper, flat drill and collets, as well as other drill tools.
To Know More about Power Steel Rail Drill - Model Srd119 Please click here